[3] DISASSEMBLY/ASSEMBLY
[3]-6. Swash bearing 10, Inner housing section (cont.)
ASSEMBLING
Fig. 26
Fig. 27
Fig. 28
(4) Assemble Change plate B to Change plate A as drawn in
Fig. 26
.
(5) Put the tab portion onto the edge of Inner housing complete while fitting Change plates to cam grooves as drawn in
Fig. 27
.
(6) Assemble Ball bearing 606ZZ, Compression spring 4 and Lock plate to Gear housing complete as drawn in
Fig. 28
.
Compression spring 5
Fit these engaging plates to Cam grooves and
mount Change plate section to Clutch cam.
Change plate A
Change plate B
Cam groove
1. Assemble Ball bearing 606ZZ into the bearing room in Gear housing complete.
2. Insert Compression spring 4 into the hole of Gear housing complete.
3. Put Lock plate on Compression spring 4.
Opposite side view
Tab
Rib
Tab
Rib
1. Assemble one end of
Compression spring 5 to
the rib of Change plate A.
2. Pass the tabs of Change plate A through the holes of Change plate B, and assemble
Change plate A to Change plate B by inserting the another end of Compression
spring 5 to the rib of Change plate B.
Ball bearing
606ZZ
Compression
spring 4
Lock plate
Put this Tab portion onto the edge of
Inner housing complete.
P 18/ 25
R
epair
