[3] DISASSEMBLY/ASSEMBLY
[3]-2. Change lever
DISASSEMBLING
1. Insert a slotted screwdriver to the notches of Gear housing
and lever it up alternately.
2. Change lever cap, Change lever with Rubber pin 4
and Leaf spring can be removed.
Disassemble Change lever section as drawn in
Fig. 4
.
Assemble Change lever section as drawn in
Fig. 5
.
R
epair
3. Face the center top of Leaf spring to
Change lever and assemble the hooks
of Leaf spring to the grooves of Gear
housing.
4. Assemble Change lever cap
to Change cover.
Fig. 4
Fig. 5
Change lever cap
Rubber pin 4
Change lever
Leaf spring
Change cover
Pointer
Mark of Rotation with
hammering mode
Rubber pin 4
Change lever
Change lever
1. Face Pointer to the opposite of the mark of Rotation with hammering
mode and assemble Change lever with Rubber pin 4 to the hole of
Gear housing.
Note
: Never connect Plug to
Outlet when the pointer
faces to the opposite of
the mark of Rotation
with hammering mode.
2. Turn Change lever clockwise 90 degrees.
5. Assemble Change lever cover to Gear housing.
6. Make sure that Change lever cap can be shifted to
each operation mode with a click for the range
designated in a black arrows.
Mark of Rotation mode on
Change lever cover will
come here in the step 5.
Change lever
Grooves of
Gear housing
hooks of
Leaf spring
center top of
Leaf spring
notch of
Change lever cap
Change lever cover
ASSEMBLING
P 6/ 25
notch of Gear housing
