P
6
/ 2
9
R
epair
[3] -1. Motor section
ASSEMBLING
Fig. 4
2. Assemble Rubber ring 60 (38) to Motor assembly (39)
while fitting its protrusion to the hole of Motor case
section of (39).
(1) Assemble Motor assembly.
Fig.4
a. Fit the groove of Rubber ring 120 (40)
to the circumference rib.
c. Put lead wires of Motor assembly
to the notch of Brush holder.
1. Assemble Rubber ring 120 (40) to Motor
assembly (39) while paying attention to
a, b and c.
b. Fit four protrusions of Rubber
ring 120 (40) to four notches
of Motor assembly (39).
Four Positioning Ribs
(40)
Circumference
rib of (39)
[3] DISASSEMBLY/ASSEMBLY
(38)