P 4/ 29
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Motor section
DISASSEMBLING
Fig. 2
(60)
1. Separate Motor section from Tank (64) by
releasing Hooks (60).
Note
: Hold Motor section tightly when you
activate without Tank (64) because Motor
section swings around.
2. <How to remove Battery cover complete>
Opening Battery cover complete (1),
remove it by pushing its hinge portion toward
the direction designated with arrow with Slotted
head screwdriver.
2a. <How to remove Grip (3)>
Keeping Grip (3) in foldered position as per the
Photograph to left, remove Grip (3) by pushing
its hinge portion toward the direction designated
with black arrow with Slotted head screwdriver.
< Note >
No need to remove Grip (3), unless Grip (3) itself
or Cowling (7) is replaced.
Slotted head screwdriver
3. Remove Switch button (4) by levering
up with Slotted head screwdriver,
inserted into the space at the center of
Switch button (4).
4. Remove 2 pcs. of Compression
spring 20 (5).
5. Switch D2VW-01-3HS (29) is held to
Cowling complete (7) with its tall rib.
Opening the tall rib with Needle-nose
pliers, shift the Switch (29) from the
place where it was, gripping with external
nails of 1R291.
(1)
(64)
(3)
(7)
Motor
section
(4)
(5)
6. Push the Switch (29) into the space
under Cowling complete (7).
7. Unscrew six 4x65
Tapping screws (6).
8. Separate Cowling complete (7) from
Separator (34).
1R291
Needle-nose pliers
(29)
(29)
(7)
(34)
(6)
(1) Separate Cowling complete from Separator.
Fig.2