![background image](http://html.mh-extra.com/html/makita/dtw181/dtw181_instruction-manual_230497009.webp)
9 ENGLISH
on
the
switch
trigger.
Release the switch trigger to stop.
NOTE:
The
tool
automatically
stops
if
you
keep
pulling the switch trigger for about 6
minutes.
Lighting up the front lamp
CAUTION:
Do not look in the light or see the
source of light directly.
►
Fig.4:
1.
Lamp
►
Fig.5:
1.
Button
Pull the switch trigger to turn on the lamp. To turn off,
release
it.
The
lamp
goes
out
approximately
10
seconds
after releasing the switch trigger.
To keep the lamp off, turn off the lamp status. First pull
and release the switch trigger. And then press the
button
for one second within 10 seconds. To turn on
the lamp status again, press the button again similarly.
►
Fig.7:
1.
Hard
2.
Soft
3.
Reverse rotation
auto stop mode
4.
Changed in three steps
5.
Button
Reversing switch action
NOTE:
To
confirm
the
lamp
status,
pull
the
trigger.
When
the
lamp
lights
up
by
pulling
the
switch
trigger,
the lamp status is
ON. When the lamp does not come on, the lamp
status is OFF.
NOTE:
When
the
tool
is
overheated,
the
light
flashes
for
one
minute,
and
then
the
LED
display
goes
off.
In
this case, cool down the tool before
operating again.
NOTE:
Use
a
dry
cloth
to
wipe
the
dirt
off
the
lens
of
the lamp. Be careful not to scratch the lens
of lamp, or it
may
lower
the
illumination.
CAUTION:
Always check the direction of
rotation before operation.
CAUTION:
Use the reversing switch only after
the tool comes to a complete stop.
Changing the
direction
of
rotation
before
the
tool
stops
may
damage
the tool.
CAUTION:
When not operating the tool,
always set the reversing switch lever to the
neutral position.
►
Fig.6:
1.
Reversing switch lever
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for
counterclockwise rotation.
When the reversing switch lever is in the neutral
position, the switch trigger cannot be pulled.
Changing the impact force
Содержание DTW181
