![background image](http://html.mh-extra.com/html/makita/dtw181/dtw181_instruction-manual_230497010.webp)
10 ENGLISH
You can change the impact force in three steps: hard,
soft, and Reverse rotation auto stop mode.
This allows a tightening suitable to the work.
Every time
the
button
is
pressed, the
number
of
blows
changes in three steps.
The
function
of
Reverse
rotation
auto
stop
mode
works
only
with
pulling
the
trigger
fully
in
counterclockwise
tool
rotation. When the bolt/nut gets enough loosened, the tool stops the impact and rotation.
For
approximately
one
minute
after
releasing the
switch
trigger,
the
impact
force
can
be
changed.
Impact force grade displayed
on panel
Maximum blows
Purpose
Example of application
Hard
3,600 min
-1
(/min)
Tightening when force and
speed are desired.
Assembling steel frames.
Soft
2,000 min
-1
(/min)
Tightening
when
you
need
fine
adjustment with
small
diameter
bolt.
Assembling furniture.
Reverse rotation auto stop
mode
3,600 min
-1
(/min)
Loosening with auto stop
function.
Disassembling bolts/nuts.
NOTE:
Reverse
rotation
auto
stop
mode
is
available only
when
the
tool
rotates
counterclockwise.
When
rotating
clockwise in Reverse
rotation auto stop mode, the impact force and speed are the same as Hard impact mode.
NOTE:
When
all
lamps
on
the
switch
panel
go
out,
the
tool
is
turned
off
to
save
the
battery
power.
The
impact
force
grade
can
be
checked
by
pulling
the
switch
trigger
to
the
extent
that
the
tool
does
not
operate.
NOTE:
While pulling the switch trigger, the impact force grade cannot be changed.
Содержание DTW181
