![background image](http://html.mh-extra.com/html/makita/dtw181/dtw181_instruction-manual_230497011.webp)
11 ENGLISH
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always
use
the
correct
size
impact
socket
for
bolts
and
nuts.
An
incorrect
size
impact
socket
will
result
in
inaccurate and
inconsistent fastening torque and/or damage to the
bolt or nut.
Installing or removing impact
socket
Optional accessory
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION:
After inserting the impact socket,
make sure that it is firmly secured. If it comes out,
do not use it.
NOTE:
The
way
of
impact
socket
installation varies
depending on
the
type
of
the
square
drive
on
the
tool.
Tool with the ring spring
For impact socket without O-ring and
pin
►
Fig.8:
1.
Impact socket
2.
Square drive
3.
Ring spring
Push the impact socket onto the square drive until it
locks into place.
To
remove
the
impact
socket,
simply
pull
it
off.
For impact socket with O-ring and pin
►
Fig.9:
1.
Impact socket
2.
O-ring
3.
Pin
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
square drive. Then return the O-ring to the original
position in the impact socket groove to retain the pin.
To remove the impact socket, follow the installation
procedures in reverse.
Tool with the detent pin
►
Fig.10:
1.
Impact socket
2.
Hole
3.
Square drive
4.
Detent pin
Align the hole in the side of the impact socket with the
detent pin on the square drive and push the impact
socket onto the square drive until it locks into place.
Tap it
lightly
if
required.
To
remove
the
impact
socket,
simply
pull
it
off.
If
it
is
hard to remove, depress the
detent pin while pulling the impact socket.
Installing hook
CAUTION:
When installing the hook, always
secure it with the screw firmly.
If not, the hook
may
come
off
from
the
tool
and
result
in
the
personal injury.
►
Fig.11:
1.
Groove
2.
Hook
3.
Screw
The
hook
is
convenient for
temporarily hanging
the
tool.
This can
be installed on either side of the tool. To install the
hook, insert it into a groove in the tool housing on
either side and then secure it with a screw. To remove,
loosen the screw and then take it out.
OPERATION
CAUTION:
Always insert the battery cartridge
all the way until it locks in place.
If
you
can
see
the
red indicator on the upper side of the
button, it is not locked completely.
Insert
it
fully
until
the
red
indicator
cannot
be
seen.
If
not,
it
may
accidentally
fall
out
of
the
tool,
causing
injury
to
you
or
someone around
you.
►
Fig.12
Hold
the
tool
firmly
and
place
the
impact
socket
over
the bolt or nut. Turn the tool on and fasten for the
proper fastening time.
The
proper
fastening torque
may
differ
depending upon
the
Содержание DTW181
