Makita DTW1004, Инструкция по эксплуатации

Страница: 10 / 16

10 ENGLISH
Impact force/bolt size corresponding chart (reference)
Impact force grade
displayed on panel DTW1001 / DTW1001XV DTW1002 / DTW1002XV DTW1004 / DTW1004XV DTW800 / DTW800XV
Standard
bolt
High ten-
sile bolt
Standard
bolt
High ten-
sile bolt
Standard
bolt
High ten-
sile bolt
Standard
bolt
High ten-
sile bolt
Hard M20 - M30
(3/4″ - 1-1/4″)
M16 - M24
(5/8″ - 1″)
M20 - M30
(3/4″ - 1-1/4″)
M16 - M24
(5/8″ - 1″)
M20 - M30
(3/4″ - 1-1/4″)
M16 - M24
(5/8″ - 1″)
M20 - M24
(3/4″ - 1″)
M16 - M22
(5/8″ - 7/8″)
Medium M16 - M24
(5/8″ - 1″)
M12 - M20
(1/2″ - 3/4″)
M16 - M24
(5/8″ - 1″)
M12 - M20
(1/2″ - 3/4″)
M14 - M20
(9/16″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
M14 - M20
(9/16″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
Soft M12 - M20
(1/2″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
M12 - M20
(1/2″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
M12 - M16
(1/2″ - 5/8″)
M10 - M14
(3/8″ - 9/16″)
M12 - M16
(1/2″ - 5/8″)
M10 - M12
(3/8″ - 1/2″)
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
Optional accessory
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION:
After inserting the impact socket,
make sure that it is firmly secured. If it comes out,
do not use it.
Tool with the ring spring
For impact socket without O-ring and pin
Only for Model DTW1001 / DTW1002 / DTW1001XV /
DTW1002XV
Align the square of the impact socket with the square
drive and push the impact socket onto the square drive
until it locks into place. Tap it lightly if required.
To remove the impact socket, simply pull it off.
1
2
3
Fig.8
►
1. Impact socket 2. Square drive 3. Ring spring