9
ENGLISH
Reversing switch action
CAUTION:
Always check the direction of
rotation before operation.
CAUTION:
Use the reversing switch only after
the tool comes to a complete stop.
Changing the
direction of rotation before the tool stops may dam
-
age the tool.
CAUTION:
When not operating the tool,
always set the reversing switch lever to the neu-
tral position.
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun-
terclockwise rotation.
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.
A
B
1
Fig.6
►
1.
Reversing switch lever
Changing the impact force
You can change the impact in three steps: hard, medium and soft mode.
This allows a tightening suitable to the work.
Every time the button
is pressed, the number of blows changes in three steps.
You can change the impact force within approximately one minute after releasing the switch trigger.
1
2
3
4
5
Fig.7
►
1.
Changed in three steps
2.
Hard
3.
Medium
4.
Soft
5.
Button
Specifications of each impact force grade
Impact force grade displayed
on panel
Maximum blows
Application
DTW1001 /
DTW1001XV
DTW1002 /
DTW1002XV
DTW1004 /
DTW1004XV
DTW800 /
DTW800XV
Hard
2,200 min
-1
(/min)
2,400 min
-1
(/min)
2,200 min
-1
(/min)
Tightening when force and speed
are desired.
Medium
2,000 min
-1
(/min)
Tightening when you need good
controlled power.
Soft
1,800 min
-1
(/min)
Tightening when you need fine
adjustment with small diameter
bolt.
