P
6
/
18
R
epair
Fig. 6
Fig. 7
1. Remove Gear housing cover
from Gear housing.
2. Put Gear housing cover on 1R232. Remove Ball bearing
with 1R283 by pressing it with Arbor press.
(3) Remove the Ball bearing of DC motor from Gear housing cover as drawn in
Fig. 6
.
(1) Assemble DC Motor to Gear housing cover as drawn in
Fig. 7
.
(2) Before assembling Handle R, set Lock off button and Switch to Handle L as drawn in
Figs. 3
and
2
.
Then,assemble Motor section to the machine by reversing the disassembly procedure. (Refer to
Figs. 5
and
4
)
Gear housing
Motor housing R
Motor housing L
4x18 Tapping screw
(4 pcs.)
Gear housing cover
Ball bearing
1R232
1R283
Gear housing
cover
Gear housing
cover
Gear housing
ASSEMBLING
Gear housing
cover
1. Assemble Gear housing
cover to Gear housing.
2. Assemble DC Motor to Gear housing cover.
Note
: Do not use removed Ball bearing.
3. Align the seam of DC Motor to
the notch of Gear housing cover.
4. Facing the seam and the notch side to Motor housing L side, set DC Motor and Gear housing section
to Motor housing R.
Then, assemble Motor housing L to Motor housing R with four 4x18 Tapping screws.
Gear housing
Ball bearing
notch
seam
notch
seam
[3] DISASSEMBLY/ASSEMBLY
[3] -2. DC Motor (cont.)
DISASSEMBLING
Ball bearing
