P 1
1
/
18
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Slide Plate
ASSEMBLING
Assemble Slide plate as drawn in
Fig. 14
.
Fig. 14
tab portion of
Slide plate
Protection plate
4. Push Slide plate toward the Tab side until it stops.
And turn M5x12 Hex socket set screw until it seats.
5. Check that Slide plate can slide smoothly
without wobbling. If not, adjust the set screw
to turn it back less than 180° to slide the plate
smoothly.
3. Secure Slide plate in place with
four 4x18 Tapping screws and
Flat washers 4.
Sleeve 5
(4 pcs.)
M5x12 Hex socket
set screw
tab portion
M5x12 Hex socket
set screw
Slide plate
1. Set Lever 54 to the release position
to make the fitting space for the tab
portion of Slide plate.
2. Set Protection plate to Flame.
Then, put 4 pcs. of Sleeve 5
to the illustrated position of
Frame. And then, set Slide
plate onto them.
