![background image](http://html1.mh-extra.com/html/makita/djs160/djs160_instruction-manual_4275757007.webp)
7
For DJS160 and DJS161
010094
For DJS100 and DJS101
010739
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Thickness gauge
• Center blade
• Side blade R
• Side blade L
• Hex wrench
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Noise
ENG905-1
The typical A-weighted noise level determined according
to EN60745:
Model DJS100, DJS101, DJS161
Sound pressure level (L
pA
): 71 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DJS160
Sound pressure level (L
pA
): 74 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
ENG900-1
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model DJS100
Work mode: cutting sheet metal
Vibration emission (a
h
): 12.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Model DJS101, DJS161
Work mode: cutting sheet metal
Vibration emission (a
h
): 13.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Model DJS160
Work mode: cutting sheet metal
Vibration emission (a
h
): 12.0 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
ENH101-16
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Metal Shear
Model No./ Type: DJS100, DJS101, DJS160, DJS161
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
31. 7. 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
Material
Cutting thickness
(mm)
Life of blades
(m)
Mild steel plate
(SPCC)
1.6
200
Stainless steel
plate
(SUS304)
1.2
150
Aluminum plate
(A-5052)
2.5
400
Material
Cutting thickness
(mm)
Life of blades
(m)
Mild steel plate
(SPCC)
1.0
120
Stainless steel
plate
(SUS304)
0.7
50
Содержание DJS160
Страница 3: ...3 9 010090 10 010091 11 001145 12 010092 13 010093 15 16 17 18 19 18 ...
Страница 47: ...47 ...
Страница 48: ...ALA Makita Corporation Anjo Aichi Japan 885294 993 www makita com ...