8 / 23
Fig. 11
10
Fixing Rotor with 1R038 and vise, set Spiral bevel
gear 10 [2] to Rotor, passing shaft of Rotor [1]
through Spiral bevel gear 10 [2].
11
Pre-setting fastening torque of 1R254 to
4.9~5.9N.m, attach 1R220, 1R222, Bit adapter
assembly and Socket bit 10 to 1R254.
12
And turn M6 Hex nut [5] with the above 1R254
clockwise until it stops. Now, assemble of Rotor
section has been finished.
Fig. 12
13
Mount Gear housing cover together with Rotor to
Motor housing, facing the notch [2] portion to the
same side to Switch lever [4].
14
Mount Gear housing facing Spindle/A to the same
side to Switch lever [4].
Note
Be careful, not to pinch your finger between Motor
housing and Gear housing cover or Fan of Rotor
which are dragged toward Stator in Motor housing by
extremely strong magnet force, when assembling
Gear housing cover to Motor housing.
1R254
1R220
1R222
1R038
[3]
[4]
[1]
[2]
[5]
[6]
[1]
[2]
[3]
[4]
