10 / 23
Fig. 16
5
Put Bearing box [1] on 1R258, paying attention to
the following points.
Note
・
The protrusion, circled with red dot line, has to be
positioned, keeping distance from both of 1R258.
・
Lead flange/A/B [3] has not to contact to 1R258
when it is pushed out together with Spindle/A [2].
6
Putting 1R032 on Spiral bevel gear 37 [4], give
shock to 1R032 with Arbor press. So, Spindle/A is
shifted from the position where it is.
Fig. 17
7
Applying 1R284 to Spindle/A/B [1], press with
Arbor press. So, Spindle/A/B [1] is removed from
Bearing box, and Gear section is disassembled as
follows.
・
Spindle/A/B [1]
・
Lead flange/A/B [2]
・
Bearing box [3]
・
Spiral bevel gear 37 [4]
As for disassembly of Lead flange/A/B [2] from
Spindle/A [1], see Fig. 21.
Fig. 18
8
First, remove Retaining ring R-32 from Bearing
box, using 1R291 in order to disassemble Bearing
box section.
1R258
[1]
[3]
[1]
[2]
1R032
[4]
1R284
1R258
[1]
[2]
[3]
[4]
[1]
1R291
[1]
