18 / 23
7
WIRING DIAGRAM
7-1
Wiring in Motor housing L before setting Dial section
Put thin lead wires of Stator, covered with tube, between Boss A and Rib A, Rib B and
Rib C, Rib D and Rib B, Boss B and Pin A.
Rib C
Rib B
Rib D
Thick lead wires of Stator (orange), (white), (blue)
have to be fixed respectively with these Lead wire
holders.
Pass thick lead wires of Stator
(orange), (white), (blue) without
putting on Pin A and Pin B.
Pin A
Pin B
Inflect thick lead wires of Stator (orange),
(white), (blue) toward the bottom of Motor
housing L, so that they are not pinched
between Motor housing Land R.
Stator
Boss A
Boss B
Rib A
Facing sleeve portion for connecting Lead wires, to the opposite
side of flat surface of Switch, connect Non insulated terminal to
Switch.
Non insulated terminal
Switch
<Wrong Connection>
Switch
< Correct Connection >
Sleeve portion
Non insulated terminal
Sleeve portion
Flat side
Flat side
