Makita DGA417, Руководство по ремонту

Страница: 22 / 23

22 / 23
Wireless activation
(for model DGA418/ DGA468/ DGA518)
When checking the wireless activation, be sure to prepare an our wireless supported tool (Circular saw, etc.).
Check Step 1 ( 9-4-1 ) to Step 3 ( 9-4-3 ) in order and if some troubles happen, refer to 9-4-4
.
Tool side
Vacuum cleaner side
8-4-1 Step1: Preparation for Wireless activation
8-4-2 Step2: Tool registration
Install battery/batteries. Wireless activation lamp lights
up in red, and then the lamp turns off.
Push the wireless activation button
briefly. And then the wireless
activation
lamp
blinks in blue.
Vacuum cleaner
Install battery/batteries or plug in
the machine
Set the stand-by switch to "AUTO"
The wireless activation lamp lights up
in red and then blinks in blue.
Supported tool
Press the wireless activation button
for some seconds, and then the
wireless activation lamp blinks
in green.
After the wireless activation lamp
starts blinking in green, release
your finger.
Vacuum cleaner
Press the wireless activation button
for some seconds, and then
the wireless activation lamp blinks
in green.
After the wireless activation lamp
starts blinking in green, release
your finger.
If the cleaner and the tool are linked successfully, the wireless activation lamps will light up in green for 2 seconds
and start blinking in blue.
If the wireless activation lamp does not light up in green, restart from Step 1 ( 9-4-1 ). If all else fails, go to 9-4-4 .
Wireless activation
button Wireless
activation lamp
Wireless activation
button Wireless
activation lamp
Registration has been completed .
Supported tool