background image

8

Transport and storage

-  When changing your position during work switch off the chain 

saw and actuate the chain brake in order to prevent an inad-
vertent start of the chain.

-  Never carry or transport the chain saw with the chain run-

ning.

When transporting the chain saw over long distances the guide 
bar protection cover (delivered with the chain saw) must be 
applied. 

-  Carry the chain saw with the tubular handle. The guide bar 

indicates backwards (20). Avoid to come in contact with the 
muf

ß

 er (danger of burning).

-  Ensure safe positioning of the chain saw during car trans-

portation to avoid fuel or chain oil leakage.

Store the chain saw safely in a dry place. It must not be stored 
outdoors. Keep the chain saw away from children.

For storing the chain saw over a long period of time or  shipping 
it the fuel and oil tanks must be completely emptied.

Maintenance

Before performing maintenance works switch off the  chain 
saw 

(21)

 and pull out the plug cap.

-  Before starting work always check the operating safety of 

the chain saw, in particular the function of the chain brake. 
Make sure that the chain is always sharpened and tightened 
correctly (22).

Operate the chain saw only at a low noise and emission level. 
For this ensure the carburetor is adjusted correctly.

-  Regularly clean the chain saw.
-  Regularly check the tank cap for tightness.

 
 

Observe the accident prevention instructions issued by 
the trade federations and insurance companies. Do not 
perform any modi

Þ

 cations on the chain saw. You will risk 

your safety.

 

Perform only the maintenance and repair works described in 
the instruction manual. All other works must be carried out by 
the MAKITA service.

 

Use only original MAKITA spare parts and accessories.

 

Applying spare parts which are not original MAKITA parts or 
accesories and guide bar/chain combinations or lengths results 
in a high risk of accidents. For accidents and damage resulting 
from using sawing devices or accesories which have not been 
approved we cannot accept any responsibility.

First aid

 

For the event of a possible accident, please, make sure that a 

Þ

 rst aid box is always immediately available in the near vicinity. 

Immediately replace any items used from the 

Þ

 rst aid box.

 

Should you ask for help, please, give the following infor-
mation:

 

- place of accident 

  

- what happened

 

- number of injured people

 

- kind of injuries

 

- your name!

NOTE

Individuals with poor circulation who are exposed to excessive 
vibration may experience injury to blood vessels or the nervous 
system.
Vibration may cause the following symptoms to occur in the 

Þ

 n-

gers, hands or wrists: ”Falling asleep” (numbness), tingling, pain, 
stabbing sensation, alteration of skin colour or of the skin. 

If any 

of these symptoms occur, see a physician!

20

21

22

23

24

SERVICE

Содержание DCS 9010





























Отзывы: