19
Replacing the sprocket
CAUTION:
Protective gloves must be put on.
Check the sprocket before mounting a new chain (
A
).
Worn out sprockets (more than 0,2 mm) (
B
) may damage the
new chain and must therefore be replaced.
- Loosen the fastening nuts (
C/1
).
- Pull off the sprocket guard (
C/2
).
- Take off the sprocket (
F/5
) from the clutch drum.
- Position the new, slightly oiled sprocket and remount all
parts in the reverse order.
Checking the sprocket
- Use the universal wrench to remove the locking washer
(
D/3
).
CAUTION
:
The locking washer might jump out on removing.
- Remove the thrust washer (
D/4
) underneath it.
The spark arrester screen should be checked and cleaned
regulary.
- Remove the screw (
F/6
), de
ß
ector plate (
F/7
) and arrester
screen (
F/8
).
Caution:
Do not use sharp or pointed objects for screen cleaning.
Damaged or misformed screen wires may result.
Replacing/cleaning the
spark arrester screen
Checking the muf
ß
er screws
- Regularly check the three fastening screws (
G/9
) for
tightness.
A
B
D
E
4
5
3
F
8
6
7
C
2
1
G
9
Содержание DCS 9010
Страница 27: ...27 Notes...
