13 ENGLISH
NOTE:
Paper filter is a throw-away type.
Sponge filter
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
CAUTION:
After cleaning sponge filter, be
sure to install it on the cleaner.
If washed in water,
dry it up before installing. An insufficiently dried
sponge filter may shorten the service life of the motor.
To remove the sponge filter, remove the dust bag or paper
filter and then pinch and take the sponge filter out.
1
Fig.42
►
1.
Sponge filter
To install the filter, press in the whole edge of the sponge filter against
the recessed wall inside the dust bag/paper filter mounting area.
1
Fig.43
►
1.
Recessed wall
Floor/carpet nozzle
Optional accessory
When the nozzle brush gets dusty, clean up the dust
with adhesive tape.
1
Fig.44
►
1.
Nozzle brush
Troubleshooting
Before asking for repairs, check the following points.
Symptom
Area to be investigated
Fixing method
Weak suction power
Is dust bag or paper filter full of dust ?
Empty dust bag or paper filter.
Is dust bag clogged ?
Dust down or wash the dust bag.
Is paper filter clogged ?
Replace paper filter.
Is the battery cartridge discharged?
Charge the battery cartridge.
Not working
Is the battery cartridge discharged?
Charge the battery cartridge.
Dust case cover does not close
Is dust bag or paper filter set ?
Set dust bag or paper filter.
NOTICE:
Do not attempt to repair cleaner by yourself.
