R
epair
P 5 / 14
< 1 > Lubrication
Apply a bit of MAKITA grease N. No.2 to the following portions marked with black triangle to protect
parts and product from unusual abrasion. See Fig.1.
< 2 > Disassembling base section
1. Separate pad from base by unscrewing 8 pcs. of pan head screws M4 x 12. And disassemble under cover and
O ring 75 from base. See Fig. 2.
Clamp lever x 2 pcs. ( Knob side and dust bag side)
Paper camp x 2 pcs. ( Knob side and dust bag side)
Fig.1
Fig.2
Fig.3
8 pcs. of
pan head screws M4 x 12
Pad
Base
Bottom view of base
Hex wrench with which hex socket head bolt M5 x 16
can be unscrewed.
Screwdriver
Rib
2. Lock balancer with screwdriver inserted at the rib of base, and take off hex socket head bolt M5 x 16 with
hex wrench, or with impact driver. Then balancer can be separated from base. See Fig. 3.
Balancer
Frame
Base
Frame
O ring 75
Under cover
< Note >
The hex socket head bolt M5 x 16 is an
adhesive screw.
