8 ENGLISH
Connecting the power source
1.
Open the cap of the plug.
2.
Align the arrow mark on the socket with that of the
power converter, and then insert the socket into the plug
all the way.
1
2
3
4
Fig.5
►
1.
Cap
2.
Plug (input)
3.
Socket
4.
Arrow mark
NOTICE:
Do not insert the socket forcibly.
If
the socket cannot be inserted easily, it is not being
inserted correctly.
NOTICE:
When unplugging, do not hold the
cords but hold the socket.
Otherwise, the cords
may be damaged and cause a malfunction.
NOTICE:
Always close the cap of the plug firmly
when the power source is not plugged.
Otherwise
foreign matter may enter the power converter and
cause a malfunction.
Cord pocket
You can put the cord into the cord pocket as shown in
the figure.
Fig.6
Installing MAKPAC
Optional accessory
The power converter can be attached to the top or
bottom of MAKPAC as shown in the figure.
Fig.7
CAUTION:
Make sure that the power con-
verter is securely fixed to the MAKPAC with the
four latches.
Otherwise falling accident may occur
and cause personal injury.
OPERATION
1
Fig.8
►
1.
Power button
1.
Press the power button of the power source to turn
it on.
