3 ENGLISH
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read the instruction manual.
volts
direct current
FCC statement
For United States only
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
FCC CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Makita U.S.A. Inc.
14930 Northam Street, La Mirada, CA 90638-5753,
USA
+1-(714) 522-8088
ICES (IC) standard
For Canada only
CAN ICES-003(B)/NMB-003(B)
SAFETY WARNINGS
WARNING:
Before use, be sure to read the
instruction manual of your product to be used
with this power converter.
IMPORTANT
SAFETY
INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS – This manual
contains important safety and operating instruc-
tions for power converter.
2. Before using power converter, read all instructions
and cautionary markings on power converter,
power source, battery, and product using power
converter.
3. CAUTION - To reduce risk of injury, use power
source only listed in the section for applicable
power source. Other types of power source may
burst causing personal injury and damage.
Power Converter safety warnings
1.
In order to ensure good performance and long-
term service life, pay attention to protect the
power converter from the following conditions.
— Corrosive gas and liquid
— Salt mist and oil mist
— Mechanical impact and vibration
— High humidity
— Extreme temperature (too cold or too hot)
The suitable ambient temperature range is between
-10 °C and 40 °C (14 °F and 104 °F).
— Electromagnetic noise (e.g. electric welding
machine, high-power equipment)
— Radioactive material
2.
Place the power converter on a horizontal
surface with no undulations and stable place.
Otherwise falling accident may occur.
3.
When carrying the power converter, discon-
nect the power source and all appliances con-
nected to output port.
Otherwise falling accident
may occur.
4.
When carrying the power converter, always
hold the carrying handles firmly with both
hands. Do not carry the power converter by
holding any other part.
Otherwise falling acci-
dent may occur.
5.
Do not use the power converter with wet
hands. Do not expose the power converter to
rain or wet conditions.
The risk of electric shock.
The power converter is not water proof.
6.
Do not insert metal objects, like pushpins,
wires or other small metal objects into the
outlets and air vents.
The risk of electric shock.
7.
Do not disassemble the power converter.
The
risk of electric shock.
