![background image](http://html1.mh-extra.com/html/makita/4327/4327_instruction-manual_4137293006.webp)
6
ENGLISH
(Original instructions)
Explanation of general view
1
Cutting action changing lever
2
Switch trigger
3
Lock button
4
Speed adjusting dial
5
Blade holder
6
Bolt
7
Hex wrench
8
Blade
9
Roller
10 Hook
11
Retainer
12
Base
13
Dust cover
14
Cutting line
15
Edge
16
Graduation
17
Starting hole
18
Hose
19
Steel base type
20
Rip fence (Guide rule)
21 Aluminum base type
22 Guide facing
23 Fence guide
24 Threaded knob
25 Pin
26 Anti-splintering device
27 Protrusions
28 Aluminum base
29 Cover plate
SPECIFICATION
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE019-1
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB016-3
JIG SAW SAFETY WARNINGS
1.
Hold power tool by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
2.
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
3.
Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
4.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5.
Do not cut oversize workpiece.
6.
Check for the proper clearance beyond the work-
piece before cutting so that the blade will not
strike the floor, workbench, etc.
7.
Hold the tool firmly.
8.
Make sure the blade is not contacting the work-
piece before the switch is turned on.
9.
Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool
only when hand-held.
Model
4326
4327
4328
4329
Length of stroke
18 mm
18 mm
18 mm
18 mm
Blade type
B type
Max. cutting
capacities
Wood
65 mm
65 mm
65 mm
65 mm
Mild steel
6 mm
6 mm
6 mm
6 mm
Strokes per minute (min
–1
)
3,100
500 – 3,100
500 – 3,100
500 – 3,100
Overall length
217 mm
(Steel base type)
217 mm
(Steel base type)
217 mm
223 mm
223 mm
(Aluminum base type)
223 mm
(Aluminum base type)
Net weight
1.8 kg
(Steel base type)
1.8 kg
(Steel base type)
1.8 kg
1.9 kg
1.9 kg
(Aluminum base type)
1.9 kg
(Aluminum base type)
Safety class
/II
Содержание 4327
