P
7
/
9
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Base (cont.)
DISASSEMBLING
M10x130 Hex bolt
Cup washer 10
(2) Remove Safety cover section as illustrated in
Fig. 3
.
(3) Unscrew M6x10 Pan head screw and remove Spark guard.
(4) Separate Base section from Motor section as drawn in
Fig. 10
.
ASSEMBLING
(1) Mount Motor section to Base section. (Refer to
Fig. 10
)
(2) Assemble Compression spring 45 and Spring holder as drawn in
Fig. 11
.
Cup washer 10
1. Unscrew M10-17 Hex lock nut,
then remove M10x130 Hex bolt
and 2 pcs. of Cup washer 10.
3. Base section is now separated
from Motor section.
M10-17
Hex lock nut
1R003
Pin 16-113
Fig. 10
M10 Hex bolt
Compression
spring 45
Handle 120
(Vise handle) side
While facing the notch of Spring holder to
Handle 120 (Vise handle) side, assemble
the holder to Compression spring 45.
And keeping the above condition, put
Spring holder onto M10 Hex bolt of Base.
Notch of
Spring holder
Fig. 11
2. Insert 1R003 into Pin 16-113 and open it fully in the pin to grip
its internal surface. And pull out the pin while twisting them.
Handle 120
(Vise handle)