MAKINEX MS-150, Руководство оператора

Страница: 7 / 18

MAKINEX MS-150
Operator’s Manual Rev0322
Page 5 of 15
INSTRUCTIONS FOR USE
WARNING
NEVER operate the MS-150 without wearing the appropriate
personal protective equipment (PPE) including appropriate footwear.
Assess the surrounding area for hazards. Ensure that any loose
clothing and long hair is firmly tied back.
WARNING
ALWAYS seek appropriate First Aid if Injury, Poisoning or Irritation
occurs due to contact with Materials and Substances.
CAUTION
ALWAYS ensure that the work place is well ventilated.
CAUTION
ALWAYS use dedicated mains power supply with extension lead not
exceeding 10 metres/11 yards
STEP 1
– ASSEMBLING THE HELIX PADDLE/ MIXER TO THE MS-150
WARNING
Ensure the Mixer is disconnected from mains power before Attaching
or Removing it to/from the
MS-150 frame.
CAUTION
NEVER place hand
under ‘Slider Clamp’ or ‘Clamp Arm’ when
adjusting the height.
WARNING
CHECK the electrical lead and plug for damage before use of the
Mixer. Do not use the Mixer if there is evidence of damage.
1. Assemble the four Castor Wheels to the bottom of the Frame using the M12 Bolts,
Washers and Locknuts provided. Fit the two Braked Castor Wheels to opposite corners
of the Frame. Check that the Castor Brakes have been engaged after assembly.
2. Attach MS-150 Clamp Arm into the Slide Arm Collar of the MS-150 Frame; tighten
Collar Thumb Screw in place.
Braked Castor Wheels