MAKINEX MS-150, Руководство оператора

Страница: 9 / 18

MAKINEX MS-150
Operator’s Manual Rev0322
Page 7 of 15
When fitting the Makinex Electric Mixer , ensure the Electrical Cord is facing to back of the
MS-150. Connect Makinex Mixer Electrical Cord to extension cord. Connect the extension cord
from mains power to the Cable Clip on Vac Lid Module.
STEP 2
– USING THE MS-150
WARNING
NEVER place hands or other articles into the Bucket whilst Mixer is
Mixing.
ALWAYS disconnect Mixer from mains power before placing hands into
the Bucket.
WARNING
ALWAYS ensure the Mixer is switched OFF before plugging it in.
ALWAYS wind-up the Extension Cord before moving the MS-150 .
ALWAYS be aware of the Extension Cord position when working around
the MS-150
™.
CAUTION
Maximum SAFE Load: 160kg (353lbs) of wet levelling compound.
DO NOT EXCEED 160kg (353lbs)
ALWAYS use correct lifting technique when loading materials.
1. Ensure Makinex Electric Mixer is firmly secured in
the ‘Slider Clamp’.
2. Attach Vac Lid Module to Bucket by clipping Side Hooks onto frame
3. Make sure the
‘Locking Pin’ is engaged (i.e., locked to prevent the bucket from
pivoting) at the base of the Bucket and that the Castor Wheel Brake has been applied.
4. Attach a vacuum hose to
the ‘Vacuum Port’. Use the supplied adaptor if using a 50mm
vac hose. Connect water hose from mains supply to Water Nozzle quick connect fitting.
Locking Pin
Mixer cord faces back
Extension cord to switch
board positioned in cable
clip
Vac Lid Module
Bag Rests
Side Hooks
Water Nozzle