Makerfarm Pegasus 12, Инструкция по эксплуатации, Страница: 8 / 80

8
Gather the following parts if your kit came with 14 of
the 20x40 extrusions then follow pages 9, 10, 11

2 20x20mm Aluminum Extrusions

2 x Cast Corner Brackets with Nubs if you have
any left
(Shown by the red circle in the photo below,
if none of your brackets have nubs then use 2 without
nubs)
 4 x Cast Corner Brackets without Nubs

4 x M5x8mm Bolts

3 x Motor Mounts

1 x M5x12mm Bolt

1 x T-Slot Nut
If you have 16 20x40 extrusions instead of 14 the
following then follow pages 12, 13 and 14

2 20x40mm Aluminum Extrusions

8 x Cast Corner Brackets without Nubs

2 x Cast Corner Brackets with Nubs

(Shown by the red circle in the photo below, if none
of your brackets have nubs then use 2 without nubs)

8 x M5x8mm Bolts

3 x Motor Mounts

1 x M5x12mm Bolt