MakerBot Replicator 2, Руководство пользователя

Страница: 49 / 60

49 E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
iNFO AND SETTiNgS
Bot Statistics
Displays the estimated total hours and minutes of
building in the lifetime of the Replicator 2 and the duration
[in hours and minutes] of the last build.
Preheat Settings
Lets you change the temperature setting for the extruder. Use
the up and down arrows to select an extruder. Press M to
select, use the up and down arrows to change the temperature,
and press the M button again to save your setting.
version Number
Displays the version number of the firmware.
restore Defaults
Returns all the settings on the Replicator 2 to factory settings.
When you select this option, a new menu appears where you
can use the arrow buttons to choose “Yes” or “No”.
general Settings
Optional settings and information.
SOUND: Turns the Replicator 2’s indicator sounds on and off.
LED COLOr: Lets you turn off the LED lights or select a color.
Choices are Blue, Green, Pink, Orange, Purple, White, and Off.
ACCELErATE: Turn acceleration on or off. Note that with
Acceleration off you should not use build speeds faster
than 45mm/s.
hELP TExT. Specifies whether you want lengthy help text
[On]or abbreviated help text [Off].
hEAT LEDs. Specifies whether or not you want the LED
light to change color when the Replicator 2 is heating.
TOOL COUNT: Specifies whether the Replicator 2 has one
extruder or two. Your Replicator 2 has a single extruder.
hEATED PLATE: Specifies whether the Replicator 2 has
a heated build plate. Your Replicator 2 does not have a
heated build plate.
DiAgNOSTiCS
LCD PANEL | INFO AND SETTINGS MENU