MakerBot Replicator 2, Руководство пользователя, Страница: 22 / 60

22
After the initial welcome message, the Startup Script displays the following:
• If the build platform is too far from the extruder nozzle, your builds might not stick to
the build plate.
• If the build platform is too close to the extruder nozzle, the build plate can block the MakerBot
PLA Filament from extruding from the nozzle. This can also scratch the build plate.
• The distance between the extruder nozzle and the build plate should be about the
thickness of the MakerBot Support card included with your MakerBot Replicator 2, in the
accessory sleeve.
To level the build platform, you must adjust the three knobs under the build platform. These
three knobs lower and raise the build platform.
• Tightening the knobs [turning them to the right] moves the build platform away from the
extruder nozzle.
• Loosening the knobs [turning them to the left] moves the build platform closer to the
extruder nozzle.
LEvELiNg ThE BUiLD PLATFOrm
!
Why Leveling Is Important
How to Level the Build Platform
C STARTUP PROCESS: LEVELING, LOADING, TESTING