25
M2 ASSEMBLY GUIDE
STEP 6:
Attach Z-axis Assembly to sled using 6pcs M4 x 20mm Flathead Screws from Bag Z inserted
through bottom, don’t tighten fully until router is centered
Note: These bolts fasten with a T-nut. A T-nut works by being specially designed to turn
sideways when being tightened. This fastens parts to aluminum extrusions, as seen in this
image.
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8