22
M2 ASSEMBLY GUIDE
STEP 1
Build roller bearing carriage by placing one blue carriage mount on either side of ring.
Insert shoulder bolt up through bottom of one carriage, slip one washer over bolt, then one
ring bearing, then another washer. Push shoulder bolt through top of
carriage and fasten with nut. Use Allen wrenches to tighten bolts and the bearings should still
rotate freely. Repeat with other chain guide.
2. MOUNTING SLED BRACKETS
Shoulder
bolt
Ring
bearing
Washer
Washer
Nut
TOP VIEW
SIDE VIEW
TOP VIEW
SIDE VIEW
L-Brackets
Ring Bracket
STEP 2:
Mount L-Brackets to Ring by lining up L-brackets as shown with
rectangular brackets on ring. Insert bolts from inside of ring bracket out
through L-brackets, two per bracket and secure with nuts, using an Allen wrench to
tighten.
Bag F
Bag G
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8