MakeKit MD2 Dronekit, Руководство пользователя

Страница: 14 / 24

Elektronikkmontering
Parts:
4 pieces of fastening tape
1 radio receiver
1 o-ring
1 piece of elastic
4 servo cables
1 radio receiver
4 servo cables
1 pc buzzer
4 pcs regulators
Mount a fastening strap on each arm (1)
Attach the radio receiver with a large o-ring
(2)
Attach the buzzer to the holder (3)
Thread the antenna through the hole next to
the radio so that it points downwards and
cannot be hit by propellers (4)
Connect regulators, buzzer and power
cables according to the wiring diagram on
the next page.
Attach the regulators along the arms and
tighten the fastening strap around. (5)
You can now pick up the drone battery. This
must be strapped in the middle underneath
the quadcopter
2
3
1
4
14
5