Major tech MT585, Инструкция по эксплуатации

Страница: 16 / 28

8. Charge
8.1. Timing:
After "Low Battery" is displayed on LCD display, perform battery
charge; LCD displays the picture shown below:
8.2. Process:
1. Plug one end of charger into the battery plug-in socket (Fig
⑬
);
and the other end into the ACV power socket.
2. If ACV plug socket is energized, the charge indicator (Fig
⑭
) is
lit on indicating that charge is underway.
If the ACV plug socket isn't energized, remove to another power-
energized one making power charge.
3. After the voltage reaches 16.5V, charge process is complete.
(It can be observed on LCD display.)
No measurement can be performed during the charging process.
9. Maintenance & repair
9.1. To avoid and electric-shock or device damage, do not wet inner
part of the tester.
9.2. Avoid the tester from being dropped that would damage or
disconnect devices.
9.3. Wipe the tester surface with soft, dry cloth and mild detergent.
Prohibit from using sandpaper or solvent.
REMEMBER TO CHARGE THE BATTERY!
ALWAYS recharge the battery when the Low Battery info appears on
the display. Leaving the battery uncharged for a long period of time
may affect the lifespan of the battery.
Charging interval: Every 3 months
16