15
Operation:
During the test run, wait for one minute, DAR will be
displayed automatically; wait for 10 minutes, PI will be
displayed automatically.
3. AUTO OFF:
System will shut down automatically after 3 minutes
without operation.
3. Press
⑨
(ENTER/SAVE) to inquire whether to clear up the
data or not; LCD displays the picture shown below:
Erase ─ press
⑨
(ENTER/SAVE). LCD displays the picture
shown below:
Not erase ─ press
⑩
(ESC) to go back to the main page.
7.1.8. Introduction of other Functions:
1. Dielectric absorption ratio (DAR):
Ratio of insulation resistance between 1-min and 30-sec
2. Polarization index (PI):
Ratio of insulation resistance between 10-min and 1-min
DAR :
1-min insulation resistance
30-sec insulation resistance
PI :
10-min insulation resistance
1-min insulation resistance
Lower insulation resistance tested takes a longer test time,
which would deteriorate the object under test. Thus, higher
DAR or PI (as close to 1) would create better insulation
grade of the object under test.
Содержание MT585
