16
C. Press
“
PAUSE
”
button again to adjust the minute, minute digit blinks. When you have
adjusted to desired time wait for at least 5 seconds to confirm, then it stops flashing.
D. Press
“
PAUSE
”
button one more time to save the setting, and the colon of clock "
：
"will
blink.
START / STOP
For starting and stopping the selected baking program.
To start a program, press the
“
START/STOP
”
button once. A short beep will be heard and the two
dots in the time display begin to flash and the program starts. Any other button is inactivated except
the
“
START/STOP
”
button after a program has begun.
To stop the program, press the
“
START/STOP
”
button for approx. 3 seconds until a beep confirms
that the program has been switched off. This feature will help to prevent any unintentional
disruption to the operation of program.
MENU
It is used to set different programs. Each time it is pressed (accompanied by a short beep) that the
program will vary. Press the button discontinuously the 12 menus will be cycled to show on the
LCD display. Select your desired program. The functions of 12 menus will be explained below.
1.
Basic
: kneading, rise and baking normal bread. You may also add ingredients to
add flavor.
2.
Whole wheat
: kneading, rise and baking of whole wheat bread. This setting has
longer preheat time to allow the grain to soak up the water and expand. It is not
advised to use the delay function as this can produce poor results.
3.
French
: kneading, rise and baking with a longer rise time. The bread baked in this
menu usually will have a crisper crust and light texture.
4.
Quick
: kneading, rise and baking loaf with baking soda or baking powder. Bread
baked on this setting is usually smaller with a dense texture.
5.
Sweet
: kneading, rise and baking sweet bread. You may also add ingredients to
add flavor.
6.
Cake
: kneading, rise and baking cake.
7.
Jam
: boiling jams and marmalades.
8.
Dough
: kneading and rise, but without baking. Remove the dough and shaping it
to make bread rolls, pizza, steamed bread, etc.
9.
Ultra fast
: kneading, rise and baking loaf in a short time, bread with a dense
texture.
10.
Bake
: only baking, no kneading and rise. Also used to increase the baking time
on selected settings
11.
Gluten-free
: kneading, rise and baking gluten-free bread. You may also add
ingredients to add flavor.
12.
Home made
: you can self-program and re-set every step time by this menu. The
time range of each program is as following
：
KNEAD1
：
6-14 minutes
RISE1
：
20-60 minutes
KNEAD2
：
5-20 minutes
RISE2
：
5-120 minutes
RISE3
：
0-120 minutes
BAKE
：
0-80 minutes
KEEP WARM
：
0-60 minutes
Please see the latter section
About the HOME MADE program
for detailed operation
