MISCOM7212GP Series Industrial Gigabit POE Switch
- 10 -
straight turns;
The cable should be straight in the trough, and should not go beyond
the trough to block other entry and exit holes. The cable should be tied and
fixed at the cable exit or the cable bend;
When cables, power cords, and ground wires are laid in the same slot,
the cables, power cords, and ground wires cannot be overlapped or mixed.
When the cable is too long, the cable must be neatly placed in the middle of the
cabling rack and cannot be pressed on other cables;
When laying pigtails, prevent the optical cable from knotting and
minimize the turning points, and the turning radius should not be too small. The
lashing should be moderately tight and not too tight. When laying on the cable
rack, it should be placed separately from other cables;
Both ends of the cable should have corresponding marks, and the
content of the marks is concise and easy to maintain.
Attention:
Laying cable, it is necessary to prevent the cable tie and turns should be
minimized, and the turning radius is not too small, the turning radius is too
small will lead to a serious loss of optical signal link. The quality of
communication.
2.3. Performance Specifications
IEEE standard
802.3
、
802.3u
、
802.3z
、
802.3x
、
802.1P
、
802.3ab
、
802.3af/at
Exchange method
store and forward
Backplane bandwidth
24G
Packet forwarding rate
17.856 Mpps
Gigabit ports
8 10/100/1000Base-T and 4
1000Base-LX
The RJ45 copper port
Physics socket: RJ45 Socket(shielded)
RJ-45 socket:
10Base-T/100Base-TX,auto negotiation
Communicate distance:<100m
PoE power method:PSE Terminal
bridging method 1/2
（
+
）
,3/6
（
-
）
PoE power output:single PoE
output≤30W(54V),total power
output≤240W
（
need the external
