MISCOM7212GP Series Industrial Gigabit POE Switch
- 1 -
1. Introduction
1.1. Product Description
The MISCOM7212GP series industrial POE switch is developed for the
high speed industry ethernet communications .It makes industrial
communication more fluent, more stable and more fast.
This switch can support both hot plugging and complicated web managed
style. All the copper ports support auto-negotiation, 10/100Mbps full duplex
and half duplex, Auto-MDI/MDI-X functions. It supports various management
method,include the command line interface(CLI) through the hyper terminal,the
telnet management system and the SNMP management software.It also
supports the network monitoring protocol of LLDP,SNTPv4 and DHCP.
This switch can supply high-grade management function including
MSTP,VRRP,IGMP,IGMP Snooping, VLAN, GVRP, QoS, VPN , Trunk, rate
control, Broadcast storm suppression, mirror port configuration, Static MAC
address transfer, diagnostic function, Email/Relay, fault alarm relay.
This switch is a standard Din rail mounting device.
This switch provides total 12 gigabit Ethernet communication ports,include
4 Gigabit SFP slot ports and 8 Gigabit RJ45 copper ports. All the ports support
802.1Q VLAN, 64 Kbps minimum step speed limit, 16K MAC address table, 4K
VLAN, 512 layer 2 multicast, and L2's Ipv4 and Ipv6 message forwarding
across the wire.
This switch provides max 8 POE+ ports,all support the IEEE802.3af/at
standard,the max power output of each port is 30W. It supports the WEB
management of the POE control. It has strong lightning, anti-static and
interference protection capabilities, support industrial applications in harsh
environments.
1.2. Product Characteristic
1.2.1. Industrial Network Performance
Support 4 gigabit SFP slot ports and 8 10/100/1000Base-T RJ45 copper
ports
Support a configurable alarm relay output
Less than 20ms fast redundancy fiber ring network technology enhance
the reliability of system communication
Support VLAN based on IEEE802.1Q, number 4094
Support for EAPS, MSTP,VRRP and other redundant protocols
8 POE+ ports, which support single port maximum power correction and
port output priority
