Maiwe MISCOM7212GP Series, Руководство пользователя

Страница: 13 / 20

MISCOM7212GP Series Industrial Gigabit POE Switch
- 9 -
2.2.3. Cable Connection
After install Ethernet switch , please correct install cable. Cable installation
please following behind notice:
Equipment port connection
This series provided 10/100Base-TX RJ45 interface port, use the
crossover cable direct connect with terminal equipment , use cross wire
connect network equipment .
2.2.4. Fiber Connection
This series Ethernet switch provide 3 x 1000Base-FX single mode or
multi-mode fiber.
Attention ：
This switch uses lasers to transmit signals over fiber cable. Laser Class 1
laser/LED products can cause serious damage on the eyes harmless. When
the equipment is power on, please do not stare directly into the laser beam.
Connection optic cable , please use following steps:

When use fiber cable port, remove SC/FC/ST port cover. When it finish
work, please put the plastic cover to protect the fiber optic head, keep clean.

Check the fiber optic cable head whether it clean or not. If it not clean,
will effect port and communication quality.

One fiber optic head connect with Ethernet switch optic port, the other
fiber head connect with another equipment fiber optic interface equipment.

After connection, please check switch the front interface’s LNK/ACT LED
lights. If lights on, connection is available.
2.2.5. Cable Layout
Before laying out the cables, check whether the specifications, models
and quantities of all cables are in conformity with the construction drawing
design and contract requirements;

Before laying the cable, check whether the cable is damaged, whether
there are factory records and quality assurance certificates that prove its
quality;

The specifications, quantity, routing direction, and location of the cables
to be laid should meet the design requirements of the construction drawings,
and the wiring length of each cable should be determined according to the
actual location;

The user cables and power cords are laid separately;

There must be no broken wires or joints in the middle of the laid cables;

Cables should be laid out neatly in the aisle, with even, smooth and