SM4200-28FC (52FC) Install Manual V2.0
Maipu Confidential & Proprietary Information
Page 17 of 24
�
Every dev
ice in the rack generates heat during operation. Provide
good ventilation and fans for the enclosed rack. Do not stack devices
closely.
�
When mounting devices in an open rack, prevent the rack frame from
obstructing the swit
ch ventilation. Be sure to check positioning of the
switch after installation.
␇
␇
␇
␇
Caution
Caution
Caution
Caution
If a standard 19’’ cabinet is not available, the switch can be placed on a
clean level desktop, leave a 100mm space around the switch for
ventilation. Do not place
anything
on the top of the switch.
Installation Instructions
�
Read related chapters in this manual carefully or participate in concerning
technology training befo
re the installation. Make sure all materials, tools
and other items required by the installation are prepared, as well as a
proper site for installation and debugging.
�
During the installation, it is required to use the brackets and screws
provided in the accessory kit, and proper tools to ensure stability and
reliability. Users should always wear antistatic uniforms and ESD wrist
straps to prevent damaging the switch, and should only use and make
standard cables and connecters. Be cautious to potential dangers
during the installation, and make protective preparations to avoid
accidents.
�
Clean the site after the installation. Please ensure the switch is well
grounded before powering it on. Users should also maintain the
switch
regularly to extend its lifespan.
Security Warning
�
Do not stare directly at the fiber port during operation to prevent eye
damage caused by the laser transceiver in the SFP optical module of
the switch.
�
Do not attempt to conduct any operation which may cause physical
injuries, accidents or damage the switch.
�
Do not install, remove, or disassemble switch and modules with power
on to avoid injuring yourself or damaging the equipment.
�
Do not open the switch without permission. Please resort to the
manufacturer for help if any problem occurs, to prevent physical
injuries and device damages.
