MyPower S2300-28TC-AC Switch Installation Manual
Maipu Confidential & Proprietary Information
Page 21 of 30
Use a ruler or tape to measure the horizontal installation hole central distance and
horizontal direction installation net space. The dimension is shown in Figure 3-1.
Check whether the support board or tray, floating nut, fixed screw, and blank panel
on the cabinet are complete. All these are the standard accessories of the cabinet.
The dimension or shape may vary with the cabinets. Therefore, to add the cabinet
accessories, contact the supplier of the cabinet to provide the original accessories.
The device must be installed on the support board or tray (in pairs) of the cabinet.
Therefore, before installing the device, first install the board or tray in the cabinet,
as shown in Figure 3-2. Use a level to test whether the support board or tray is
horizontal. If the support board or tray is unstable, please adjust the fixed bolt of
the support board or tray to make the support board or tray horizontal and then fix
it.
F
I G U R E
3 -2
S
U P P O R T B O A R D O R T R A Y P R E
-
I N S T A L L A T I O N D I A G R A M
Check whether the floating nut for fixing the device is already installed in the square
hole of the cabinet upright. If no, insert the floating nut to the corresponding square
hole according to the support board or tray location. Generally, place one device on
a support board or a pair of support tray. It is not recommended to overlap several
devices.
