MyPower S2300-28TC-AC Switch Installation Manual
Maipu Confidential & Proprietary Information
Page 30 of 30
Check whether the Console cable is correctly connected.
If no problem is found in above examination, may be the configuration cable is
faulty or the terminal (such as hyperterminal) parameter setting is incorrect. In
such case, conduct the corresponding check.
5.4 Messy Code Displayed on
Terminal
If messy codes are displayed on the configuration terminal, it is likely to be the
terminal (such as hyperterminal) parameter setting error. Please check the
parameter setting of the terminal (such as hyperterminal). The baud rate is “9600”,
data bit is “8”, and parity check is “none”, stop bit is “1”, flow control is “none”, and
choose terminal emulation as “auto-detect”.
