Maipu In-Wall AP Series User Manual
Maipu Confidential & Proprietary Information Page 15 of 34
Figure 2-9 The WLAN client information
(1)
MAC Address
: specifies the MAC address of the host that is
successfully connected to the AP.
(2)
Tx Size
: specifies the data traffic that sent by the host.
(3)
Rx Size
: specifies the data traffic received by the host.
(4)
Tx Rate
: specifies the current rate of sending data package by the host.
(5)
RSSI
: specifies the signal strength between the host and the AP.
(6)
Link Time
: specifies the time that the host is connected to the AP.
2.3.4 System Load
On the
System Load
interface, you can view the current AP memory and CPU
load, as shown in Figure 2-10.
Figure 2-10 The system load interface
(1)
Auto refresh
: specifies whether to automatically refresh the current
system load status.
(2)
Service
: specifies whether to enable the system load alarm
mechanism.
