Maipu In-Wall AP Series User Manual
Maipu Confidential & Proprietary Information Page 22 of 34
2.4.7 MAC Filtering
On the
MAC Filter
interface, you can configure the MAC filtering function of the
AP.
Choose
WEB Management
>
2.4GHz WLAN
>
MAC Filter
to enter the
MAC
Filter
interface, as shown in Figure 2-20.
Figure 2-20 The MAC filtering interface
(1)
Status Operation
: specifies the filtering rule for the content in the
MAC list.
Blacklist
indicates that the content is blocked and
Whitelist
indicates that the content is allowed.
(2)
MAC List
: fills the MAC information to be filtered.
2.5 Network Configuration
2.5.1 IP Address
On the
IP Address
interface, you can configure the IP address, subnet mask,
and gateway of the AP. Through these functions, you can specify the AP to
register on a certain AC. If the AP and AC do not exist in the same LAN, the
gateway and IP address of the AP need to be filled. If the AP and AC exist in the
same LAN, the information can be omitted.
