Maipu In-Wall AP Series User Manual
Maipu Confidential & Proprietary Information Page 17 of 34
Figure 2-13 The wireless parameter interface
(1)
WLAN
: specifies whether to enable or disable the wireless network
function of the AP.
(2)
Band
: specifies the network protocol mode that the AP works at.
Currently, the AP supports the combination of the 802.11B, 802.11G,
802.11N, B+G, G+N, and B+G+N six protocols.
(3)
Channel
: indicates the wireless channel. It is the data signal
transmission channel considering the wireless signal as transmission
media. When multiple devices exist in the area covered by the AP signal,
set different channels to avoid interference. The AP has a total of 1 to 11
channels.
(4)
RF Power
: adjusts the output power of the AP.
(5)
User Isolation
: the wireless clients cannot communicate with each
other when the function is enabled.
2.4.2 SSID
On the
Add
interface, you can configure the SSID information of the AP.
Choose
WEB Management
>
2.4GHz
WLAN
>
SSID
to enter the
Add
interface, as shown in Figure 2-14.
