Maintronic CBA UP, Руководство пользователя

Страница: 35 / 53

CBA UP - 10.752 Manual english - www.maintronic.com / 35 53
7. Operation . CBA UP
7.1 Notes for operation
There are different methods to operate the blind actuator.
Driving with "Drive Time"
When driving with an adjusted "Drive Time", a single pulse (e.g. pressing a button or starting a time-controlled scene) is triggered,
which causes the blind / roller blind etc. to move once to open position 0% or end position (closed) 100%.
This travel time is set via the "Drive Time" parameter and stored in the device.
Driving to a specific position
With one trip to an absolute position, any horizontal position can be approached. The specific position is controlled by a slider (from OT
0% - UT 100%), which determines the status of the connected blind / roller blind etc.
Slat adjustment
The angle of the slats can be adjusted via the slider "angle" (only available for fixtures with blinds). This slat position is stored during a
travel to a certain position and the set value is automatically set again after reaching the set position.
For example, if the blind is only to be moved down a little bit and the slats are at 5%. Then, after reaching the target position, the slats
are set back to 5%.