Maico ZEG2 EC, Монтаж и эксплуатация

Страница: 19 / 36

Table of contents │ UK
19
Table of contents
1. Scope of delivery ................................... 20
2. General notes ........................................ 20
2.1 Specialist installer qualification ........ 20
2.2 Symbols used ................................. 21
3. Intended use .......................................... 21
4. Non-intended use ................................... 21
5. Safety instructions .................................. 24
6. Product information ................................ 26
7. Technical data ........................................ 26
8. Storage .................................................. 27
9. Environmental conditions and operating
limits ...................................................... 27
10. Mounting .............................................. 27
11. Electrical connection, Unit settings ....... 29
11.1 Connection advice......................... 29
11.2 Main board, already cabled ........... 29
11.3 Setting the ventilation level
volumetric flows .................................... 29
11.4 DIP switch settings ........................ 29
12. Start-up ................................................ 31
12.1 Register the remote control(s) at a
ventilation unit ....................................... 31
12.2 Register the remote control(s) at
several ventilation units ........................ 32
12.3 De-registering remote control(s) .... 32
12.4 Resetting a remote control ............ 32
13. Cleaning, maintenance ........................ 32
13.1 Battery change .............................. 33
14. Fault rectification .................................. 33
15. Wiring diagram ..................................... 33
16. Spare parts

Fig. A ............................ 34
17. Dismantling .......................................... 34
18. Environmentally responsible disposal .. 34
Appendix Product data sheet (RVU) ......... 35
Figures
ZEG2 EC Ventilation unit
1 Housing lower part with 6 connection sockets
I-V: Exhaust air socket (Pos. V with
knockout points)
VI: Outgoing air socket
2 Front cover
3 Sealing cap sockets (2 pcs.)
4 Housing insert
5 Worm housing
6 Main board with wireless receiver and
registration button
7 Power cable/mains plug with grounding
contact
8 Impeller
9 Motor
10 Board with humidity sensor
11 Remote control ‒ [11.1] push button for
opening / [11.2] LED bar
A Fixing holes
S Knockout point
T Rating plate
ZEG2 EC-FB Remote control
Button Operation
Function
1 x Short Absence**
1 x Short Ventilation level 1, low
1 x Short Ventilation level 2,
normal
1 x Short Ventilation level 3, high
1 x Short Timer 15 minutes
in ventilation level 3*
2 x Short Timer 30 minutes
in ventilation level 3*
3 x Short Timer 60 minutes
in ventilation level 3*
1 x Short Automatic operation
with humidity control***
* Then, returns to the previously selected
ventilation level. Press another button to
turn the timer off.
** Ventilation unit is running in energy save mode
and is not reacting to the humidity sensor.
*** Ventilation unit is running dependent
on the humidity value measured by
the unit’s integrated humidity sensor.