Maico Ero Scan Pro, Руководство по эксплуатации

Страница: 12 / 74

Operating Instructions
9
Turn off the
ERO•SCAN
Pro and insert the external probe plug into the
socket on the top of the
ERO•SCAN
Pro. The plug will fit only in one
direction. The arrows on the plug should face the display on the
ERO•SCAN
Pro.
Turn on the
ERO•SCAN
Pro. The status indicator on the external probe
keypad will be solid green indicating the
ERO•SCAN
Pro has detected
the presence of the remote probe. Disconnect and reinsert the
connector if the status indicator on the probe is not illuminated or is
yellow rather than green. To return to using the internal probe of the
handheld, turn the instrument off, disconnect the external probe and
power up the instrument again.
Note: Misalignment of the plug and socket when installing the remote probe can cause damage to the
pins in the plug and the pin receptacles in the socket. The plug and socket should be visually inspected
prior to each installation of the remote probe. If damage is observed, contact your Special Equipment
Distributor or Maico Diagnostics.