Mahlkonig K30 Competition, Оригинальное руководство пользователя

Страница: 18 / 44

18
Double espresso GrinDer
9. Place the drip tray (13) into the corresponding opening under the outlet
(6)
so that the magnets underneath the drip tray sit in the appropriate
intakes.
Connecting the potential equalizer
The connection for potential equalization (19) is located on the back of the
grinder (see
Fig. C
). The electrical connection and testing of electronic func-
tionality must be carried out by an electrician.
1. Loosen and remove the lock nut (see Fig. D ).
2. Remove the lock ring and the flat washer.
3. Connect the potential equalization conductor
(22)
to the potential
equalizer.
The potential equalization conductor is not included with
delivery.
Use a copper potential equalization conductor with a minimum
cross-section of 10 mm
2
.
If you have questions about this, contact an authorized service
partner or electrician.
4. Secure the potential equalization conductor by reattaching the nut, flat
washer and lock ring.
5. Make sure that the grinder is switched off (On/Off switch (21) to “0”) and
connect the grinder to the power supply by inserting the power plug
(20)
into a properly installed safety socket.