Mahlkonig K30 Competition, Оригинальное руководство пользователя

Страница: 19 / 44

19
K30 TWin 2.0 (HYbriD) | en
Adjusting the portafilter support and attaching the
container intake
For grinders designed for mains voltage ranges of 200–230 V or
220–240 V, the portafilter support and the container intake are
attached with hexagon socket screws. Use the 3 mm Allen key
supplied with this model for fixing.
For grinders designed for a mains voltage range of 100–127 V,
the portafilter support and the container intake are attached with
slotted screws. You will need a slot screwdriver for fixing (not
included with delivery).
Adjust the portafilter support
(10)
to the size of your espresso machine’s
portafilter (see Fig. H ):
1. Make sure that the grinder is switched off and not connected to a power
supply (On/Off switch
(21)
to position “0”).
2. Turn anticlockwise using a slot screwdriver or the 3 mm Allen key
supplied to loosen the screws (8) for adjusting the portafilter support
(left and right).
The portafilter support is lowered as far as it will go.
3. Insert the portafilter into the portafilter intake
(7)
.
4. Push the portafilter support upwards until the portafilter fits exactly
between the portafilter support and the portafilter intake.
If the portafilter support does not fit, contact your supplier
(see chapter “Service”).
5. Hold the portafilter support in position and fix it by turning the screws
for adjusting the portafilter support (left and right) until tight using a slot
screwdriver or the 3 mm Allen key supplied.
6.
K30 TWIN 2.0:
Repeat steps 2–5 to adjust the second portafilter support.
K30 TWIN 2.0 HYBRID:
Attach the container intake (18) by fixing it to the grinder on both sides
using the two screws (16) for attaching the container intake and two
washers (see
Fig. I
).