MAHA FWT 1 Euro, Руководство по эксплуатации и техническому обслуживанию

Страница: 45 / 134

Eurosystem / Profi-LON PC Program Operation
4.6 D1 E101BA1-GB09
4.2 Automatic Test Procedure
In order to start the automatic test procedure,
the screen must show the main menu.
The instruction line shows the following
message:
)
New test can begin...
If this message does not appear press <F8>
New Vehicle
Now the test lane is ready. When the vehicle is
driven onto the individual equipment the
corresponding test screen appears.
4.2.1 General Information
During testing always pay attention to the messages and instructions on the instruction line
(in the description this is indicated by
)
instruction text ).
The recorded measurement values are automatically taken over in the temporary memory and
remain there until they are stored in connection with customer/vehicle or until they are
overwritten when a new test is conducted.
The order in which the measurements are filed in the memory is preset and therefore of special
importance for the brake test.
It is possible to intervene in the automatic test procedure via keyboard or remote control.
The function keys mentioned in this description correspond with the function keys on the remote
control:
The order of tests is side-slip test, shock absorber test and brake test. The test procedure is
identical for Eurosystem and Profi Eurosystem. The same applies to the entry of visual
vehicle defects.
You are now guided step by step through the automatic test procedure. The operation of the
individual screen elements and the keyboard should already be familiar to you. Otherwise we
recommend that the chapter
„Screen elements“ and „Keyboard operation“ should be repeated.